Measure the detail, then choose the model
Keep fixing centres, overall size and clearances together in your hardware notes.
Begin with the mounting arrangement
For a two-fixing pull, record the distance between the fixing centres separately from the overall length. For a single-hole selection, note that mounting arrangement explicitly rather than substituting a centre distance.
Two products can share the same hole-centre measurement while having different overall lengths. Even a single model can offer that choice: the 8814 table includes both 100 mm and 115 mm overall lengths at 64 mm centres.
Read beyond the first dimension
Check the width and height listed with the chosen row, and review how the profile will sit with the cabinet face and surrounding details. Do not assume that all catalogue references use one identical dimension convention for every shape.
For ring pulls and specialty pieces, request the drawing if movement, mounting geometry or the meaning of a height measurement affects your design.
Make a repeatable note
- Model and finish.
- Single-hole or two-fixing arrangement.
- Hole centres where stated.
- Overall length or diameter, plus the printed width and height.
- Furniture thickness, nearby clearances and any information still to be confirmed.