Polished brass and polished silver are two descriptive finish directions in the catalogue. They appear on different combinations of pulls and knobs, giving a furniture scheme several forms to consider. Keep each finish tied to the particular model shown rather than assuming an entire interchangeable set.
8859 in two finish directions
The selected 8859 ball-end pull appears in polished brass and polished silver. Both entries list 96, 128, 160 and 192 mm hole centres, with overall lengths of 130, 160, 198 and 232 mm.
The width is 12 mm and printed height is 30 mm across those rows. This provides a useful common geometry for a finish comparison, while the final enquiry should still identify the chosen finish and complete size row.
| Model / finish | Printed dimensions | Catalogue page |
|---|---|---|
| 8859Polished brass · row 1 | hole centres 96 mm · length 130 mm · width 12 mm · height 30 mm · weight 96 g | PDF 22 Printed 40 |
| 8859Polished brass · row 2 | hole centres 128 mm · length 160 mm · width 12 mm · height 30 mm · weight 118 g | PDF 22 Printed 40 |
| 8859Polished brass · row 3 | hole centres 160 mm · length 198 mm · width 12 mm · height 30 mm · weight 140 g | PDF 22 Printed 40 |
| 8859Polished brass · row 4 | hole centres 192 mm · length 232 mm · width 12 mm · height 30 mm · weight 150 g | PDF 22 Printed 40 |
Two polished-brass knob references
The 6677 ribbed ball knob has two printed sizes: a 28 mm top diameter with a 37 mm height and 110 g weight, and a 25 mm top diameter with a 34 mm height and 78 g weight. Model 6607 is listed at 24 mm top diameter, 33 mm height and 68 g.
These numbers give the comparison a useful scale. The photographs show different surfaces and outlines; a sample can help review the detail beside the actual cabinet finish.
| Model / finish | Printed dimensions | Catalogue page |
|---|---|---|
| 6677Polished brass · row 1 | top diameter 28 mm · height 37 mm · weight 110 g | PDF 23 Printed 41 |
| 6677Polished brass · row 2 | top diameter 25 mm · height 34 mm · weight 78 g | PDF 23 Printed 41 |
| 6607Polished brass · row 1 | top diameter 24 mm · height 33 mm · weight 68 g | PDF 23 Printed 41 |
9901 in polished silver
The 9901 sphere knob is listed in polished silver with diameters of 30, 25 and 18 mm, and respective weights of 117, 64 and 25 g. The selected table does not add a height to those rows.
For a fit or clearance decision that depends on an unstated dimension, request the model drawing. A diameter and weight should not be turned into an assumed full geometry.
Treat the finish name as a visual reference
Polished finish descriptions do not specify a coating chemistry, a quantified reflectance or a particular care regime. If those details matter to the project, include them in the enquiry for confirmation.
When coordinating pulls and knobs, record each actual model-and-finish combination separately. A shared design direction can bring a scheme together, but the catalogue reference is what makes the intended part clear in the quotation.